Distributor / authorized representative that deals with supply & delivery of filter press to industrial enterprises of Russia
Engineering company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), Russia, has been successfully working with a number of Russian industrial enterprises at the local market for more than 20 years. Since the company’s founding, it has acquired immense engineering experience, market reputation, and has realized more than a hundred large-scale projects at the industrial plants in Russia. Our company is continuously in search of new business partners, who consider Russian market investment-attractive and want to boost their sales in the region, as well as expand their field of activities and enter a new international level.Contents:
We are interested in cooperation with the manufacturers of filter press, who are looking for an official and reliable distributor to deal with supply & delivery of their equipment to the industrial plants in Russia.
The company’s top management and sales team are well acquainted with the Russian market, its mentality and laws; they also understand industrial specifics of the financial and economic activities of the Russian customers. All our sales managers have a large customer database, extensive experience of successful sales and well-established connections with the potential buyers of your filter press. This allows our managers to promptly set out the most promising directions for promotion and to ensure a rapid entry of the products into the promising Russian market. Our employees, who are fluent in English and German, are focused on working at the international market with the supplies of foreign equipment.
Our team of experienced engineers, who can handle the most serious technical problems, constantly keeps in touch with the Russian customers, holds meetings and delivers presentations regarding the latest achievements of our manufacturing partners. They point out the engineering challenges and actively communicate with all the departments at Russian plants. That is why the specifics of doing a business in the Russian Federation are well-known to us, and we also know the equipment of the local industrial plants and their up-to-date modernization needs.
Once we become your authorized representative in Russia, our marketing staff will carry out a market research in order to check the demand for filter press, will submit a market overview for filter press that you offer and evaluate the needs for this type of equipment at local plants. Our specialists will also estimate the potential and capacity of this market at local industrial plants. Our IT-team will start developing a website for your products in Russian. Our experts will assess the conformity between your filter press and customer needs as well as analyze the common reaction to the new goods in general. We will look into the categories of potential customers, and pick out the largest and the most promising plants.
Upon becoming your authorized agent on the territory of Russia, ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), will obtain certificates, if required, for a batch of the goods, for various types of filter press in compliance with Russian standards. We can also arrange the inspection in order to obtain TR TS 010 and TR TS 012 Certificates. These certificates provides permission to operate your equipment at all industrial plants of the EAEU countries (Russia, Kazakhstan, Belarus, Armenia, Kyrgyzstan), including the hazardous industrial facilities. Our company is eager to assist in issuing Technical Passports for filter press as per Russian and other EAEU countries’ requirements.
Our engineering company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), collaborates with several Russian design institutes in various industrial segments, which allows us to conduct preliminary design as well as subsequent design works according to the standards, construction rules and regulations that are applicable in Russia and other CIS countries. It also enables us to include your filter press into the future projects.
The Company has its own logistics department that can provide packing service, handling as well as the most efficient and cost effective mode of transportation of the goods (incl. over dimensional and overweight goods). The goods can be delivered on DAP or DDP-customer’s warehouse basis in full compliance with all the relevant regulations and requirements that are applicable on the Russian market.
Our company has its own certified specialists who will carry out installation supervision and commissioning of the delivered equipment, as well as further guarantee and post-guarantee maintenance of filter press. They will also provide necessary training and guidance for the customer’s personnel.
Filter press. A brief overwiew
Filter presses present an assembly for suspension solid phase separation (filtration). Batch activity(operation cycle is divided into single phases) as well as filtrate external positive feed under relatively high pressure ( up to 2-6 MPa) turn up to be peculiar features of such assemblies operation. Common name for given type filters derives from operation chambers densification mechanism design, identical for mechanical presses and hydraulic presses.
Filter presses are widely used for filtration of suspension with comparatively inconsiderable solids share. Based on design type, filters are divided into chamber and frame-type filter presses, as well as automated chamber filters with similar operating principle. Filterable slurry enters frames/chambers shank bores under the influence of external pump. Herewith fluid phase penetrates filter membranes and flows through drain holes into the pan or closed reservoir (the first case is called “ filtrate open drainage”, the second is called “ filtrate closed drainage”). Generated cake discharge may be conducted manually (agitation, water-washing or removing by shovel) or automatically. In the latter case, the filter doesn’t require manual control and operates according to strict program loop.
Filtration surface may range from 2 to 800 sq. m. Suspension upstream pressure constitutes up to 2 MPa. Frames and plates are made of cast iron, steel and steel with corrosion-resistant coating. Filters design also includes aluminum, titanium alloys, rubber and plastic ware.
Filter presses are characterized by large filtration surface per unit area, considerable pressure difference index (i.e. large driving energy), lack of moving parts, as well as separate plates operation checking feature.
Filter press operating process consists of four recurrent cycles:
- Suspension feed;
- Filtration process (before receiving a cake of set thickness);
- Cake washing and drying;
- Filter opening, cake discharge and subsequent closing.
Filter press appears to be widespread intermittent filter. It presents the system of frames and plates with filter material – “blanket” between them. Frames and plates are installed vertically in line and rest against support tracks by their side feet. Plates are smooth along the edges and corrugated in the center. Grooves at the bottom of the plate are provided with the channel for filtrate drainage. The following bores are located at the plate top part: central for suspension feed and two bores along the edges – for washing fluid feed. The same bores are perforated on the frames.
Frames and plates pack is tighten between two supporting plates –one is fixed, the other moves on rollers. When the pack assembling, plates bores are matched with frame bores and form end-to-end channels, where fluids and air are fed. Frames between the plates form cake chambers. “Blankets” edges serve as tight joints.
Suspension under the pressure is fed into the filter chambers through end-to-end channels, where filtrate penetrates the blankets, flows through the grooves into the channel and is cumulated in the volume capacity. Cakes remain inside the chamber. When the chambers are filled with solid content, the suspension feed in stopped and the washing fluid starts to be fed. Herewith every second drain channel is closed and the washing fluid penetrates both blankets and cake between them. In the following steps, chambers are blown off with air or hot steam. In conclusion, plates and frames are moved away and cake layer is removed. Then, filtration cycle is repeated.
If necessary, steel, cast iron or ceramic plates and frames are equipped with special channels, used for heating agents and refrigerants feed. Filter press working area can reach up to 140 sqm, pressure can reach up to 1.5 MPa.
Automated filter press
Automated filter presses are widely used at manufacturing site. The pack of this type filter press consists of filter plates, each topped by perforated sheet. Remaining space between the sheet and plate surface is used for filtrate. Damp-proof shear walls are installed between the plates and frames. The plates and frames are tightened between two supporting plates and form the chambers, where suspension separation process takes place. Long-length blanket, passing between the plates and stretched by hydraulic device is applied as filter membrane.
When the pack assembling, plates bores are matched and form end-to-end channels. They are used for suspension, as well as washing fluid and snap blow air feed. The press is also provided with channels for filtrate, fluid and air drainage. After suspension separation, solid phase washing and drying, water under the pressure is fed into the space between shear wall and plate for cake extraction. Then, the plates are pulled apart and cake layer is removed from filter blanket. The cake is disposed in the pipeline located on blanket both sides.
This type filter presses primary virtues are presented by: process automation, compact size, cake extraction and minimum time expenditures for plates pulling apart, cake discharge and the pack assembly (action time takes no longer than a few minutes).
Frame-type filter press
There exist fairly large number of filters, different in design, sizes and operating peculiarities. Frame-type filter press appears to be of the most common devices in chemical industry.
Frame-type filter press consists of the pack of rectangular disks and frames positioned interchangeably in line and hung to the backing. The disks are corrugated and covered with filter cloth. Suspension under the pressure flows through the channels into the frame cavity and is separated by filter membrane. Solids remain on the cloth and fluid penetrates the membrane and is drained through the plate gutters into the filtrate tank. After filtration process termination, the cake generated on the cloth, is removed. Frames and disks are detached and solids layer is discharged under the dead weight or removed with a knife. Then, the disks are closed and filtration cycle is repeated.
Chamber filter presses
Chamber filter presses are used for suspensions cakes filtration and washing in different chemical plants. This filter type may be applied in the following industries:
- mining metallurgy;
- petroleum refining;
- ore mining;
- for wastewater residues dewatering after aerobic fermentation and reagentizing.
In terms of design, chamber filter press consists of vertically positioned plates stack. There are several plates’ types:
All the plates are installed on linear tie bars. The bars are equipped with the guides where the plates are moving. When the press is closed, filter plate with neighboring plates form filter and washing chamber. Chamber thickness constitutes 30 mm. Suspension is fed though the manifold, formed by the plates suppression. Filtrate is drained through the choke, connected with drainage manifold, located at the plates’ bottoms. For cake washing, filter press is equipped with bores designed for washing fluid feed by reverse-direction flow. Washing filtrate is drained to the right from filter axis. Washing fluid is fed under filter cloth, then penetrates double cake thickness, and then penetrating the subsequent plate fabric, is discharged to the manifold though the channel.
Cloth regeneration mechanism consists of trolley with sprinkler moving on guides. Regeneration is conducted when sprinkler is forwardly moving along the plate. Qualitative regeneration is conducted by pure water. Water is collected in containment basin. The basin is opened by two hydraulic cylinders for cake discharge.
Mechanical calculations for filters
Joint sealing in packs of plates and frames or solely plates requires creating a definite force P by applying force clamp that can be calculated according to the formula:
P ≥ Qp + Rgas
where Qp is the exceptional force arising from filtration process or cake washing, it arises from internal pressure p influence on operating chambers cavity. Rgas if the shim response:
Qp = p·Fop
Rgas = m·p·Fpack
where Fop is the plate operating surface;
Fpack – surface, where tightening occurs;
m – added coefficient (m is always equal to 3 for filter presses).
Force p in calculations is presented as the basic operational load, for example, for filter press frame.
Calculation of force p for clamp mechanism with electromechanical drive includes a few steps: lifting screw fastness and resistance are calculated, then axial bearing durability and screw-nut torque factor are defined. Then an engine power is defined and kinematic chain elements are selected.
The same property for clamp mechanism with hydraulic drive, is calculated in the following way: hydraulic cylinder size is counted, then, in case of its oversize, hydraulic cylinder durability is counted.
When manual drive applying in clamp mechanism, drive-screw is counted first, than the necessary force for wheel shaft and ratchet gear lever is defined. V-shaped locking device for filters is usually counted on self-braking.
Chamber and frame-type filter presses
Filter presses are widely used in chemical industry. Operating process in these filters is accelerated by pushing the fluid under the pressure of nearly 3-4 atm.
Such filter consists of several chambers, divided by hard membranes with filter cloth between them. Membranes have channels, necessary for filter suspension circulation, washing fluid discharge and inflow, filtrate and other fluids discharge.
Suspension for filtration is fed to the chambers under specific pressure. The fluid penetrating the cloth is removed to the tray through the channels. The cake, in turn, sticks to filter membrane cloth and forms pressed kneaded filter cake.
If filtration should be conducted by applying refrigerating or heating, filter press is equipped with special channels, used for refrigerating medium or steam feed.
Filter presses may be divided into chamber and frame-type
Frame-type filter press consists of rectangular interchanged frames and plates. Filter cloth is pressed between them. Two neighboring plates, with a frame between them, form a separate filter chamber. Drainage appliance (groove) necessary for filtrate discharge into the collecting channels is positioned on such filter plates. Such an appliance simultaneously serves both neighboring chambers. Frames and plates possess sufficient thickness to withstand pressure in several atmospheres. The bores positioned at the top and axially matched, are applied for filter fluid feed into the chambers. Filtrate flows off through the cocks positioned at the plates’ bottom part.
Frame-type filter press workflow
Filtration in frame-type filter press is conducted in the following way. The fluid is forced into the central channel and then is directed to the chambers internal cavity through the bores in frames top walls. The fluid penetrating filter blankets, flows through the grooves to the pallets, then to the lower collecting channel. When the filtration process is over, the fluid is removed outside through the cock. The cake remains on the filter membrane inside the chamber. When the chambers are filled with cake, that is characterized by the drop of filtrate flowing from the cocks, it is necessary to start cake washing with subsequent its removing.
In order to wash the cake, filter press is equipped with channels passing the frames and plates top part and connected to chamber cavity. Water for cake washing is fed from the filter membrane reverse side and penetrates cake layer in the chamber, and this way is collected in the neighboring plates’ channel. In order to conduct washing, it’s unnecessary to open all the plates’ cocks, but only one cock at every pair of plates. Hence it’s necessary to open all the cocks during the filtration process. All the even-numbered plates’ cocks starting with the one, where suspension is fed, should be opened, but all odd- numbered plates’ cocks should be closed when washing. When the washing process is over, it’s necessary to dry the cake. For this purpose filter press should be blown off by pressurized air. Then, the cake may be discharged.
Frames thickness should range from 20 to 50 mm. Number of frames, used in filter presses, depends on required productive capacity and cake amount, and ranges from 10 to 60.
Plates and frames are mounted on horizontal guides fixed on the housing. Plates and frames are cuddled together by manual hydraulic or screwed closure. Screwed closure is used for slights number of frames. At large number of frames, screwed closure cannot provide for the required tightness. Hydraulic closure is formed by high pressure. It is equipped with pressurized reservoir or manual pump.
Figure below displays an example of the frame-type filter press:
Filter press filtration diagram
- Bag filters
- Band filters
- Cartridge-type filters
- Chamber filter press
- Continuous filters
- Cyclones and hydrocyclones
- Disk filters
- Discontinuous filters
- Drum filters
- Dust collectors
- Electrostatic precipitators
- Fabric filters
- Filter separator
- Frame filter press
- Gas purification equipment
- Gas purification filters and systems
- Granular filters
- Grit classifiers (sand separators)
- Industrial oil purification equipment
- Nutsche filters
- Oil separators (oil skimmers)
- Pan filters
- Plate filters
- Pressure filters
- Reverse osmosis filters and systems
- Rotary filters
- Sand filters
- Sedimentation tanks
- Strainer filters
- The calculation problems for selecting filters
- Turbine oil purification filters and systems
- Vacuum filters
- Venturi scrubbers
- Waste oil recovery filters and systems (lube and hydraulic oil)
Upon becoming the official distributer of filter press, our company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), carries out the following: finds the buyers of your products on the market, conducts technical and commercial negotiations with the customers regarding the supplies of your equipment, concludes contracts. Should a bidding take place, we will collect and prepare all the documents required for the participation, conclude all the necessary contracts for the supply of your equipment, as well as register the goods (filter press) and conduct customs clearance procedures. We will also register a certificate of transaction (Passport of Deal) required for all foreign trade contracts in the foreign currency control department of the authorized Russian bank so that currency transaction could be effected. If required, our company will implement an equipment spacing project in order to integrate your equipment into the existing or newly built production plant.
We are convinced that our company ‘Intech GmbH’ LLC (ООО «Интех ГмбХ»), will become your reliable, qualified and efficient partner & distributor in Russia.
We are always open for cooperation, so let’s move forward together!